Read more about our transponder systems HERE.
Ask our Sales team for details HERE
TRANSSYS 2000 is a modern, safe and comfortable system for contactless switching of appliances (locks, garage door drives, illumination, alarm devices etc.). TRANSSYS 2000 will give you the flexibility and independence that no mechanical switching system can offer. Despite the manifold possibilities, the application is easy to install: You will get a completely pre-configured system, which is ready to use directly after installation. The system is based on the contactless transponder principle so the keys are non-wearing and maintenance-free (no battery or contact). With the help of the Master-Key (red) the system can be reprogrammed very easily and existent keys can be added or removed.
TRANSSYS 2000 - max. 100 keys
TRANSSYS 2000 KRYPTO - max. 100 keys, additional encryption of transferred data
TRANSSYS 2000 Plus - max. 1800 keys
TRANSSYS 2000 Plus KRYPTO - max. 1800 keys, additional encryption of transferred data
1. Is TRANSSYS suitable for a small family house as well as for a big block of flats (housing estate)?
2. Can we choose a number of access units and select the doors in which they will be installed?
YES. TRANSSYS can be used for the entrance door and for doors of shared rooms, such as a laundry or a lift. Upon customer´s wish, all the doors can be unlocked with one key.
3. What should I do if…
a) …I loose my key fob?
If you do not have a Key Manager for your small system in the family house, please reset the unit completely using the master key (see the manual). You will cancel all the registered keys, including the lost one. Unfortunately, you cannot deregister only one key since it is not not available physically. Then, register all the keys – transponders which you wish to use in the system, including a new, spare key.
If you have a Key Manager (key administration system) available, your adminstrator will make the so-called delete key from the data stored in the computer. It is a data copy of the lost key fob which cannot unlock the door but it can delete the data of the lost key in the unit.
b) …I want to add a new key fob?
A new key fob can be added whenever you wish to until you reach the limit number of your TRANSSYS transponder system.
c) …the reading unit does not work?
If the control LED is not blinking/signalling red on the reading unit, please check the power supply. This LED blinking signal can be switched off in the unit configuration.
If the reading unit does not respond to a key fob, please check the conductivity between the control unit and the reading unit.
If the reading unit responds/ registers the key fob with a quickly blinking LED signal, the key fob is defect or it has not been registered yet.
If the reading unit registers the key fob correctly but it does not unlock the door, please check the power supply to the electrical lock, respectively a cable between the control unit and and the latch.
If the reading unit registers the key fob correctly and the power supply is fine but it does not unlock the door, please send your control unit to our service team (your seller) for inspection.
d) ...your Key Manager (key fob administration system) does not work?
4. Can you train partner service companies or sellers of locking systems?
It is necessary to allow opening the door from inside by emergency key or handle in a case of fire when using this system.
Please use our Contact form to order your TRANSYSS.